Gnat River Boats: Classic Motor Boats

Gnat River Boats make 20ft and 25ft Classic Motor Boats built to order.

Classic Motor Boats have a fibre-glass hull and are built to suit the customer's individual needs.

20ft Classic Motor Boat

25ft Classic Motor Boat

The Classic 20ft Boat is based on a well known hull from Cape Cod in North America. The unusual beam gives the boat wonderful stability and exceptional room.

The style of the transom and run of the hull provides a very efficient water flow and with only 13hp there is power in reserve even at a hull speed of 5.8 knots.

The hull is constructed of hand laid polyester resin with alternate layers of CSM and woven fibre glass to Australian standards.

The hulls are framed out with timber. The cabin and deck are also timber. The whole exterior is sheathed with fibre glass and painted. The interior is painted and trimmed with Rosewood.

The interior layout can be varied to the customer's needs.

These vessels are ideal for short get-aways and are easily handled by the less experienced.

The Classic 25ft River Cruiser includes:

fibre-glass hand-laid hull
opening side windows
full galley and sink
2 burner metho stove
flush toilet to holding tank
separate hand basin
pressure water supply system
sound insulated engine box
all cushions supplied
forward anchor locker
Rosewood interior trim
deck cleats
6 roof hand rails
stainless steel bow rail
stern rail
27 mHz radio
spot lights
33 Hp 3 cyl diesel motor

Options include:

safety gear
fridge
CD/radio player
depth sounder
large sliding roof section to open up the back of the boat